BioTek Agilent Synergy H1 Hybrid Reader Multimode w WARRANTY

BioTek Agilent Synergy H1 Hybrid Reader Multimode w WARRANTY 

This is a Nice Used Good Working Synergy H1 Hybrid Monochromator Multimode Reader. It Used a Monochromator for Absorbance & Fluorescence Plus a Filter Cube for Fluorescence TRF. It Can also w Read Luminescence. Unit Has Been Fully Tested in all Three Modes and Every Mode is in Excellent Working Condition. Physically the Unit has Light General Wear. Test Results are Noted Below for all Three Modes. Unit Will Guaranteed for 30 Days Allowing Enough Time for Your Lab To Fully Test and Inspect. Please Add $275 Flat Rate Freight Shipping.

Included:

• Agilent Bio-Tek Synergy H1 (H1MF) Hybrid Reader SN# 20013017
• Gen5 Software on HP Stream 11 Laptop (Windows 10)
• HP Stream 11 Laptop (Windows 10) 
• Fluorescence Filter Cube: 330Ex/615Em & 560Ex/590Em
• All Power Cables and Communication Cables
• User's Manual

Features:

• Detection Modes: Monochromator Absorbance (UV-Vis)
• Detection Modes: Monochromator Fluorescence Intensity
• Detection Modes: Filter TRF & Luminescence
• Microplate Types: 6- to 384-well plates, Petri and cell culture dishes
• Temperature control Four Zone incubation to 45 °C
• Shaking Linear, orbital, double orbital
• Control Gen5 Software (Windows 10 HP Notebook)
• Dimensions (W x D x H) 19 x 16 x 13″
• Power 100 – 240V AC 50/60HZ
• Weight 50 lbs

Absorbance

• Light source Xenon Flash
• Detector Photodiode
• Wavelength Selection Monochromator
• Wavelength range 230 – 999 nm, 1 nm increment
• Bandwidth 4 nm (230-285 nm), 8 nm (>285 nm)
• Dynamic range 0 – 4.0 OD
• Resolution 0.0001 OD
• Pathlength Correction Yes
• Monochromator Wavelength accuracy ±2 nm
• Wavelength repeatability ±0.2 nm
• Reading speed (kinetic): 96 wells: 11 seconds : 384 wells: 22 seconds

Fluorescence Intensity

• Lamp Xenon Flask
• Wavelength range Monochromators: 250 – 700 nm
• Monochromator bandwidth Fixed, 16 nm
• Detection system PMT detector
• Wavelength selection Quad monochromators (top/bottom)
• Sensitivity Fluorescein 2.5 pM (0.25 fmol/well, 384-well plate) – top
• Fluorescein 4 pM (0.4 fmol/well, 384-well plate) – bottom
• Reading Speed 96 wells: 11 seconds: 384 wells: 22 seconds

Luminescence

• Sensitivity Monochromator system: 20 amol ATP (flash)
• Wavelength range 300 – 700 nm
• Dynamic range >6 decades

If This Unit Does Not Meet Your Needs: Other Available Microplate Readers